Greenteeth® reduce the time and money spent on every stump. Each tooth has three cutting edges, and you can easily switch to a fresh edge with simple tools, without removing the pocket. Made with the same high-quality carbide as the original Greenteeth, Wearsharp teeth provide a more consistent cut throughout the life of the tooth. Appropriate for most standard stump grinding machines above 85hp.
Through extensive research & development, Greenteeth improved upon their original Greenteeth by altering the concave of the tooth. The patented design of the Wearsharp allows the tooth to retain a sharp cutting surface, unlike traditional teeth that tend to round over.
Use with 1100 series pockets only, available in threaded straight, threaded angle, threaded reverse counterbore straight, counterbore angle & counterbore reverse.
Wearsharp teeth should be rotated or changed before the diameter starts to decrease or when performance is reduced.
Wrench Size: 3/4″
Torque: 50 FT-LBS (68Nm)
Warning: This product can expose you to chemicals including Cobalt and Nickel, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
- Carbide Steel
- Country of Manufacture:
- Manufacturer Part Number:
- Product Type:
- 1100 Series