Greenteeth will reduce the time and money spent on every stump versus traditional teeth. Each tooth has three cutting angles, and you can easily switch to a fresh edge with simple tools and without removing the pocket. High-quality carbide gives these teeth superior wear resistance. Appropriate for most standard stump grinding machines ranging from 40 to 85hp.
Red teeth have a deeper concave making the edge less blunt, therefore better for sandy conditions or soft woods. The green teeth have a more shallow concave, making the edge more blunt and better for adverse conditions and rocky soil. Materials and price are the same.
Use with 900 series pockets, available in straight, angle & reverse.
Teeth should be rotated or changed when they start to dull, which decreases their performance. With the red and green Greenteeth, this will usually occur when they round off about 1/16” on the edge.
Wrench Size: 5/8"
Torque: 35 FT-LBS (47Nm)
Warning: This product can expose you to chemicals including Cobalt and Nickel, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
- Carbide Steel
- Manufacturer Part Number:
- Product Type:
- 900 Series