The ART Spider Jack 3 has been redesigned for more efficiency and easier use while still retaining the best slack tending in any device. Now features a full frame body which can be locked to hold position while moving around the canopy.
With the new design, turning it in the releasing position and pressing the thumb brake needs very little force and the smoother handling allows for more convenience and safer feeling when using the speed control.
The SpiderJack 3 also has a secured locking function which provides the ability to move around without rope falling through device. This gives the climber the ability to make moves without the need to release slack when repositioning.
The frame is made of high quality stainless steel, so the danger of failure is very low even under high stress.
The integrated swivel allows to turn and use the device in the optimum direction and can be used right or left handed. The pulley under the cam provides a fairlead so the rope entry is always at the proper angle.
The new design also makes it impossible to place the cam in the wrong position when replacing or changing out. The big replaceable wearing pin inside the rope channel allows for working with the device for many years.
SpiderJack 3 features:
- certified according to EN 358
- multifunctional device for ascending and descending with the running double rope
- for left and right handers
- two cams: for ropes with Ø 11 to 12 mm and Ø 12 to 14
- frame made of high quality stainless steel
- minimum breaking strength: 4,945.6 lbs or 22 kN
- working load: 440 lbs
- weighs 1.1265 lbs
- EN 358 Certified
- Rope Capacity:
- 11 to 14mm
- Tensile Strength:
- 4,945 lbs (22kN)
- 440 lbs ( 1.9 kN )
- Product Type:
- DRT Climbing Devices
- Manufacturer Part Number:
- Country of Manufacture: