Description
The DMM Kinisi Max is a modular and hard-wearing sit harness developed in partnership with Treemagineers. Every aspect of the Kinisi is adjustable, including both rope bridges through the use of a patented bridge adjuster. Your weight is spread comfortably over the ergonomic webbing pattern by tough support material and foam padding. All hardware and the Kinisi itself are made to DMM's high standards at their facilities in Wales. Compatible with a variety of tool carriers and accessories, including the DMM Tendon.
Details
Features
- The patented rope bridge adjuster provides easy configuration for comfort and optimized positioning.
- The rear restraint point on the back of the harness is easy to locate and doubles as a secure attachment point for a chainsaw lanyard.
- The two side rings provide work positioning attachment points.
- Two forward Ds provide suspension attachment points and can be positioned to suit your center of gravity for comfort and maneuverability.
- Sliding aluminum buckles allow for smooth and hard-wearing adjustment.
- Moveable webbing stoppers let you run personalized webbing lengths without compromising safety.
Additional features
Maximum comfort and support. Webbing is woven through a supporting material and then padded with foam, providing comfort by spreading the user’s weight over a large surface area. This structural webbing is then slimmed down where bulk would inhibit movement.
Designed to last. All hardware is optimized to be textile-friendly and reduce webbing wear.
Replaceable components for enhanced lifespan. Users have the option to replace the pads, elastic keeper loops, leg elastics and loops, rear elastics, riser webbing, bridges, and bridge hardware.
Independently evaluated to the performance requirements of the following international standards:
- ASNZ 1891 – Pass
- ANSI/ASSP – Z359.12-2019 – Pass
- CAN/CSA – Z259.12 – Pass
- ASTM F0887-20 – Pass except the structural webbing is under 44.5mm and the harness has a rear attachment point.
- CSA Z259.1-05 PD saddle – Pass except the structural webbing is under 41mm.
Vast customization options
Customizable rope and webbing bridges. Available in a variety of different terminations and lengths.
Removable webbing stoppers. Webbing lengths can be shortened to the user’s requirements.
Bosun Chair compatible. Eyelets on the forward Ds can be combined with the Bosun Chair kit.
Attachment slots for non-PPE upper assemblies.
DMM component compatibility
DMM harness accessories. Pre-cut holes allow use of XSRE carabiners, Stowaways, and the Caiman.
Multiple storage solutions. Gear brackets allow use of the Vault range and Parking Lot.
Harness attachments for restraint according to EN358. Rear restraint point can be used with classic DMM hardware such as the PerfectO, Ultra O, and AmericanO.
Harness attachments for work positioning according to EN358. Side rings can be used with classic DMM hardware such as the PerfectO, Ultra O, and AmericanO.
Harness attachments for suspension and work positioning according to EN813. Forward Ds are compatible with DMM connectors. Rope bridges work with a range of hardware including Anchor Rings, Ultra O, Axis Swivels or the Rigger Pulley. Webbing bridges work with Anchor Rings, AmericanO, Compact Shackle, and Axis Swivels.
- Size: Small
- Color: Black
- Weight: 2400g
- Hip Dims. (in): 25 - 33
- Leg Dims. (in): 17 - 23
- Max. user weight (lbs): 330
- Rope Bridge Ø (mm): 10
- Certification: EN358:2018 / EN813:2008
- Size: Medium
- Color: Black
- Weight: 2800g
- Hip Dims. (in): 31 - 40
- Leg Dims. (in): 18 - 25
- Max. user weight (lbs): 330
- Rope Bridge Ø (mm): 10
- Certification: EN358:2018 / EN813:2008
- Size: Large
- Color: Black
- Weight: 3000g
- Hip Dims. (in): 35 - 48
- Leg Dims. (in): 20 - 29
- Max. user weight (lbs): 330
- Rope Bridge Ø (mm): 10
- Certification: EN358:2018 / EN813:2008